Sunday, 5 November 2017

A Generic Bridging Train & Pontoon Bridge (plus a few other bits)

Since I started wargaming I've always wanted to have a bridging train. In the past I've made half-hearted attempts with a few pontoons with bridging sections but, because of the cost of white metal wagons and the fact that an actual train will rarely get used (except as an interesting column of military wagons), I haven't bothered with anything more substantial. 


Then War Bases wagons and carts came along. War Bases don't actually make a pontoon wagon (yet) but they do produce a wagon that can be easily and cheaply converted. All I did was use the deck with a few extra pieces of balsa wood as planks and add a couple of trestles (made using off cuts from the MDF kit frame) for the home made balsa wood pontoon. Normally I'd stick the pontoon to the wagon, but in this case I've left them separate so that they can be used to represent a pontoon bridge under construction. 

The teams used for the pontoon wagons are also by War Bases.


I made one pontoon wagon up a while ago. Now I've gone the whole hog and produced another which along with War Bases Engineers Cart with cast resin load will make up my bridging train.


In the near future I intend to tackle some new wide river sections. To that end, I've purchased a heap of MDF sheet, and I have made up the first piece - the pontoon bridge piece. I made it using a 2mm MDF base with foam board banks. The bridge is balsa wood planking with lolly pop stick supports; the end poles are barbecue skewers.

Until I make the rest of the river this piece cannot be finished because I want it to blend in seamlessly. A post on this will follow.


The bridge is constructed in three pieces: The ramps on the river banks (as a fixed river section piece with bridge heads) that can be slotted into the river system as desired and two two pontoon bridging spans with planking afixed. Along with the two pontoons from the wagons, this should be enough to represent the bridge in varying stages of completion. I think this will work rather well. I can feel a few bridging scenarios in the offing!

Lastly, here are two other carts by War Bases. The first is a turnip cart with a load of hay made from P.V.A. soaked teddy bear fur, the second is a water cart

I can't recommend these wagons and carts enough, the quality is excellent. The turnip and peasant carts are £4 each. Having resin components, the water and engineer's cart are £5 and £7 respectively. War Bases teams are £4 per pair of cast metal horses. 



I still have two more War Bases carts to make up: Peasant cart 2 and Peasant cart 3. I just love 'em!


9 comments:

Der Alte Fritz said...

Your pontoon wagons are wonderfully crafted and painted. Very inspirational.

Jim

Steve J. said...

Very effective and look forward to some form of bridging scenario in the future.

Heinz-Ulrich von Boffke said...

Yes! The train looks great. Even if something like this is seldom used, it certainly enlivens a quieter table corner somewhere.

Best Regards,

Stokes

rct75001 said...

James great work on the pontoon wagon and the bridges also.

I picked up a few of he Warbases wagons from Salute and also love them - so simple yet they finish up very well. The variety of loads and configurations is a real bonus.

Richard

Phil said...

Absolutly superb, painting and basing...

Gonsalvo said...

The wagons are excellent, and I love the pontoons.
In the US Blue Moon through Old Glory are good source of a great many different wagons as well (but no pontoon wagons). Shipping to the UK makes them too costly, though (shipping inside the US is a flat $9 for any size order).

JAMES ROACH said...

Hi Peter,

Agreed, as you know I'm a big fan of some of the OG stuff. They do do pontoon wagons for their Napoleonic stuff but the French ones, as an example, are £28 each over here.

Perry also do a nice French one for £17 (team not included) with extra matching pontoons with a 'span section' at £11 each - though the pontoons are not very 'wargame generic' because they represent riveted metal pontoons and (to my mind) they are a little short for a the base span of my troops: this isn't very 'historical' on my part but having decided on 'generic' (I would not paint the French ones as French) I wanted 'game useful' over 'table accurate'.

In any event, for me, the metal option was too expensive for something that will rarely see the light of day - a nice to have, only at the right price.

Best Regards,

James

caveadsum1471 said...

Lovely work on the pontoon team, agreed warbase are great for wagons, I've got a load for my Italian wars, they go together faster than metal ones and of course are considerably cheaper.
Best Iain

marinergrim said...

Like you my wagon train has expanded considerably with the advent of Warbases lines. All excellent stuff and I do like what you're doing with them. Much inspiration to be had.